Grout Machines
RW 4100
- Compact Size: 30″ deep x 36″ wide x 49″ tall, weight 580 lbs.
- 10 gauge steel construction
- 3″ channel iron base with 2″ angle iron legs
- 41 gallon mixing hopper
- Thorough mixing of the grout accomplished by the unique design for the mixing paddles and hopper baffles.
- Reliable 13 HP Honda OHV electric start engine
- Variable speed, all hydraulic drive
- 12 gallon hydraulic reservoir
- Bowie rubber gear pump (20 GPM @ 125 PSI)
- Typically used for Bentonite grout
- Sandblasted, primed, and painted Rose-Wall red
RW 4100 OB
- Compact Size: 30″ deep x 54″ wide x 49″ tall, weight 645 lbs.
- 10 gauge steel construction
- 3″ channel iron base with 2″ angle iron legs
- 41 gallon mixing hopper
- Thorough mixing of the grout accomplished by the unique design for the mixing paddles and hopper baffles.
- Reliable 13 HP Honda OHV electric start engine
- Variable speed, all hydraulic drive
- 12 gallon hydraulic reservoir
- Bowie outboard bearing rubber gear pump (25 GPM @ 125 PSI)
- Typically used for Bentonite grout
- Sandblasted, primed, and painted Rose-Wall red
RW 5800
- 58 gallon mixing hopper with a hydraulic driver mixing paddle
- 10 gauge steel construction
- 3″ channel iron base with 2″ angle iron legs
- Thorough mixing of the grout accomplished by the unique design for the mixing paddles and hopper baffles
- Reliable 13 HP Honda OHV electric start engine
- Variable speed, all hydraulic drive
- 15 gallon hydraulic reservoir
- 3LL6 progressive cavity grout pump producing 15 gpm. @ 225 psi.
- 36” deep x 60” wide x 51” tall, weight 825 lbs.
- Typically used for cement slurry
- Sandblasted, primed, and painted Rose-Wall red
RW 5800 DH
- Single 58 gallon mixing hopper with a hydraulic mixing paddle
- 24 gallon dumping hopper mounted on top of the grout pump
- 3LL6 progressive cavity grout pump producing 18 gpm. @ 225 psi
- 13 HP electric start Honda engine
- 15 gallon hydraulic reservoir
- 80″ x 40″ x 51″ tall 43″ working height, weighing 825 lbs
- Typically used for cement slurry
- Sandblasted, primed, and painted Rose-Wall red
RW 11600 PCPDH
- Double 58 gallon mixing hoppers with hydraulic driver mixing paddles allow continuous grouting
- 30 gallon dumping hopper that the mixing hoppers dump into is mounted between the mixing hoppers.
- A 3LL6 progressive cavity grout pump producing 15 gpm. and 225 psi pumps the grout
- The hydraulic system is powered by a 20.3 HP electric start Honda engine with a 5 gallon gas tank allowing long run times
- A two section hydraulic pump allows the grout pump to run independent of the mixers and water pump
- A hydraulic driven water pump is included allowing the operator to fill the hoppers with water and also wash down the machine when finished
- A 30 gallon hydraulic reservoir provides enough oil for the system to run cool
- The grouter is built on a 90”x 48” x 51”tall 3” channel frame, weight 1,800 lbs.
- The machine is equipped with center lifting points for easy handling
- Typically used for cement slurry
- Sandblasted, primed, and painted Rose-Wall red
RW 4100 U/D
- Hydraulic cylinders raise and lower grout machine for travel height and working height
- 9100 series Bowie gear pump 125 psi 25 gpm
- 41 gallon mixing
- Thorough mixing of the grout accomplished by the unique design for the mixing paddles and hopper baffles.
- Hydraulic system requirements 10 GPM 1,500 PSI
- Typically used for Bentonite grout
- Sandblasted, primed, and painted Rose-Wall red
